FAQ Search Results

The furnace is capable of supplying the 1600 CFM required for 4 tons of cooling. For flue sizing, it is recommended to contact your local gas supplier and National Fuel Code.

There are not published specs for the blade. You can contact Rheem parts at (479) 648-6237.

Yes, this unit is Energy Star rated.

The maximum SEER rating is 13 SEER.

The drain hose is 5/8 I.D.

Please see the image below for the dimensions of this unit.

Take a look at the image below for the length and width dimensions.

Take a look at the image below.

Yes, if the existing system is standing pilot and is wired as shown.

Touch the middle of the display and rotate the outer ring to the desired option.

If it is a geared shaft, the part number for the motor would be #6992.

If it is a Double D shaft, the part number for the motor would be #6993.

The curb is 140 lbs installed.

These pellets are exclusively for use in JJM products, pH Power Pellets® are exclusive to JJM® condensate neutralizers.

Weil McLane recommends the 383-500-631 be changed as follows:

To the Owner: Condensate neutralizer tubes should be replaced every two years, or every 2,000 operating hours, or when PH level moves below 6, whichever comes first.

The P-S64A-T24A-A is 29" without the wall sleeve.

The filter size depends on the size of the boot that was installed.